The following are the same type of products

The following are related products

12V 24V DC Geared Motor Brushless Low RPM 5 To 600RPM Electric BLDC Motor In DC Motor 24V With Reversible Adjustable Speed Brake Function Overload And Overcurrent Protection

Introduction of the motor

1. Name of the motor : 37GB3525 High Torque Gear Motor Brushless 12V 24V

2. Brushless geared motor is composed of a brushless high speed motor and a gearbox to form a complete DC brushless geared motor. The life of a brushless motor is about 30 times that of a brushed motor, the maximum life can reach 30,000 hours, can greatly reduce the maintenance cost of the project. If the load of the project does not exceed the rated torque of the motor, then the motor is ideal for use in smart devices with long life requirements

3. Prominent feature : Full metal gears; long life; stable and reliable performance; low noise 40dB ; support reverse; high torque; FG signal output hall signal; motor can stop rotating immediately after turning off the power, with brake function; Motor with PWM regulation speed and speed line output ; The motor has overcurrent overload protection 3A to prevent motor damage ; No sparks are generated when the motor is running, which can avoid interference with the device; the brushless motor is controlled by the frequency conversion technology, which is more energy-efficient than the carbon brush motor.

4. Rated voltage have DC 12V and DC 24V

5. DC 12V ; You can choose the no load speed have :
5rpm/10rpm/20rpm/30rpm/50rpm/100rpm/200rpm/300rpm/500rpm/600rpm

Rated torque between 0.3 To 15 KG.CM; Select a no load speed in DC 12V, there will be corresponding rated torque and stall torque, please refer to the parameter table below.

6. DC 24V ; You can choose the no load speed have :
5rpm/10rpm/20rpm/30rpm/50rpm/100rpm/200rpm/300rpm/500rpm/600rpm

Rated torque between 0.4 To 15 KG.CM; Select a no load speed in DC 24V, there will be corresponding rated torque and stall torque, please refer to the parameter table below.

7. Direction of rotation of the motor: CW Or CCW ; Support Reversed

8. The shaft shape of the motor : D type, please refer to the size chart below for all dimensions of the motor.

9. The speed of the motor can be adjusted using the speed controller. This motor and speed controller are sold in combination. You can refer to the combination sales introduction below.

10. This motor is suitable for a variety of micro-automation equipment. As long as you confirm that the motor voltage and torque of your choice are suitable for the voltage and load of your project before purchase, there is no limit to the scope of use of this motor.

Wiring method introduction

Red line: Connect DC power supply positive +

Black line: Connect DC power supply negative-

White line: When the motor rotates counterclockwise, it does not need to be connected

White line: Connect the white line to the black line and the direction of rotation of the motor is clockwise

Blue line: PWM adjust speed line, can be connected to 0 To 5V pulse width governor

Yellow wire: FG signal wire, output Hall signal

Friendly reminder: The positive and negative poles of the power supply are forbidden to be connected incorrectly. The signal cable is forbidden to be connected to the power supply. Please use the motor strictly according to the above description, otherwise the motor will burn out, thanks

Our Service

1. Your local time is different from our country’s time, but according to China time, we will have professionals to help you from 7 a.m. to 11 p.m., we will not delay your business.

2. After receiving your order, your order will be submitted to the production workshop immediately, we will arrange your order quickly.

3. Before you buy, if you have any questions, you can contact us first, we will give you the most satisfactory answer, and give you the most reasonable advice.

4. In order to facilitate our transactions, we can accept other payment methods.

5. All motors were tested ok before delivery in our company, we will send you a notification or product image before shipment.

6. We can customize the product according to your requirements, the scope of customization is no load speed, voltage, torque, diameter, noise, life or the size of the shaft etc.

7. Before you receive the product, we will remind you of the package transportation status and avoid the loss of the package. After you receive the goods, if there are any questions, we will handle it for you in the first time.

8. About our store : You can add attention to or collect our stores, because our stores will give more discounts to fans of this store from time to time, we will also share more DIY electronic fun videos. You just need to move your little finger, needn’t pay any at the cost, you can get something more beneficial than other buyers.

Question Time

1. The product received has quality problems, what should I do?

Reply : We value the quality of our products very much. We will strictly supervise every link of production, and strictly check the quality of products before shipment. Therefore, the probability of product quality problems is very small.

If the product has quality problems, perhaps you are busy with other things, but you don’t have to worry, you can choose to contact us at any time. But the time in China is different from the time in your country. When you contact us, maybe we are sleeping, but we will reply you immediately when we go to work. We will provide you with the best solution, I hope we can have more friendly cooperation, we will continue to support your every project.Thank you.

2. I hope the seller will send the goods to my Chinese agent. What should I do?

Reply : Please contact us directly, we can send the goods to the specified place according to your requirements. And the total price sent to other parts of China will be lower than the price sent to your country.

3. What should I do if I encounter any problems before and after purchase?

Reply : Please contact us, we will provide you with the most professional services, and we hope to help you understand this product and the entire transaction process.